X
Electronic & Engineering Co. (I) P. LTD

NDT Products & Testing Equipments

Products

  • py1-mpi

    PERMANENT MAGNETIC YOKE MODEL PY­1

    PY­1 Permanent Magnetic Yoke:

    • For magnetic particle inspection applications as per various international specifications such as ASTM E 709, ASTM E 1444, ASME Sec V, ASME Sec 7, MIL­STD­1949.
    • Rugged construction for reliable magnetic inspection.
    • Light Weight: Weighs only 400 Grams.
    • Requires no mains electric supply.
    • Easy to use, Simple and highly economical as it requires no power.
    • Lifting Capacity: 18 Kg at 100 mm pole spacing.
    • Capable of Testing with both Dry and Wet method of Powder applications.
    • Ideal Inspection tool for Petrochemical Industries, Chemical Industries.
  • py2-mpi

    PERMANENT MAGNETIC YOKE PY­2

    • Meets International Standards’s ASME SEC V ART 7, BS6072­1981, MIL­STD­271F(SH) for Magnetic Particle Inspection application.
    • Rugged Construction for Reliable Magnetic Inspection.
    • Easy to use, Simple & Highly Economical.
    • No power requirements.
    • Lifting Capacity: Above 18 Kg, At 100mm pole spacing.
    • Suitable for both Dry & Wet applications.
    • Ideal in Petrochemical, Off Shore, Chemical Industries, etc.
    • Small, Reliable & Strong Magnet with no requirement of Re­magnetisation.
    • Durable and for long life use.
  • PM-X

    PERSONAL RADIATION MONITOR PM-X

    • Reliable
    • Light Weight
    • Audio Alert
  • pin-testing

    PIN TESTING

    Diameter : 40 mm to 80 mm
    Thickness : 5 mm to 25 mm
    Length : 150- 500 mm

    Test Task

    • Longitudinal defect detection of depth 50 micron & above
    • Planner defects.
  • piston-testing-system

    PISTON TESTING SYSTEM

    Piston Diameter : 60 TO 180 MM
    Piston Height : 50 TO 220 MM
    Weight : 500 g TO 6.5 Kg
    Machine can be design for single & double grooved or ungrooved pistons

    Test Task

    Top bond; Bottom bond; Back bond
    Overl of the above
    Cooling gallery position from axial with porosity defects
    Cooling gallery position from radial with porosity defects
    Crown Crack; Skirt Crack
    Porosity defects between cooling gallery & cast iron ring
    Porosity defects in pre bowl area
    Other type of defect if required.

  • plate-ut

    PLATE UT

    Thickness : 6 to 50 mm
    Width : 1000 to 5100 mm
    Length : 1000 to 14000 mtr
    Material : Steel
    Test Speed : 6 to 30 mtr/min
    Test Task : FBH of 3 mm to 6 mm Slot of 3 to 5 mm

  • pocket_dosimeter

    POCKET DOSIMETER

    • Light Weight & Compact to Fit in Pocket
    • Easy to Read, Large LCD Display
    • Loud, Audible Dose / Dose Rate Alarms
    • Wide Measurement Range
  • pragma

    PRAGMALITE PLATFORM & PAUT 16/128 PHASED ARRAY BEAMFORMER

    Simplest user interface in the industry

    • 16 active channels up to 200 v
    • Multiplexing over 128 elements
    • Supports two mono-transducers
    • Time-of-flight diffraction (TOFD) is also available on the cartridge.
    • 100 Mhz, 16 Bits. 512 Focal Laws, ACG, TCG and much more
    • Ready for most applications without extra options
    • Modular system ready to accept ECT, UT, EMAT
  • precesion-seamless-tube

    PRECISION SEAMLESS TUBE

    Dia Range : 6mm to 25mm(optional 50mm)
    Wall Thickness : 0.4 – 5mm
    Length : 2 – 26 m
    Material : Stainless Steel

    Test Task

    • Longitudinal and Transverse Flaw Detection
    • Flaw Detection in Angular Direction (Optional)
    • Wall Thickness measurement
    • OD/ID Measurement
  • probes_1

    Probe range

    • Contact Normal Beam Transducers
    • Dual Element Transducers
    • Angle Beam Transducers
    • Immersion Transducers (Focused / Non-focused)
    • Replaceable Delay Line Transducer

     

  • probes

    PROBES

    • Probes for non-destructive crack detection using eddy current.
    • Individual probes for permanent installation in a testing station.
    • Scanning a testing track which is produced either by moving the test item or by moving the probe.
    • Different designs: round, flat, angled.
    • Individually adapted special probes.
    • Diverse rotating heads with adapted rotating probes.
  • R1 For Source Procurement