ELECTRONIC & ENGINEERING CO. (I) P. LTD.
06
Apr
Share
No Comments on TESTING OF ALUMINIUM CASTINGS WITH ADVANCED ULTRASONIC FLAW DETECTOR – AS414 EECI Blogs
TESTING OF ALUMINIUM CASTINGS WITH ADVANCED ULTRASONIC FLAW DETECTOR – AS414
Non-destructive testing using ultrasonic measurement is used to ensure the quality of Aluminium-casting products. The quality of a casting depends on the presence of discontinuities such as porosity and on the final metallurgical structure. Discontinuities occurring in the sub-surface of the cast structure mostly have irregular surfaces which scatter the ultrasound waves and make ultrasonic testing[…]
Read More09
Mar
Share
No Comments on QUALIFICATION OF COPPER ALLOYS FOR PRODUCTION OF ELECTRIC COMPONENTS EECI Blogs
QUALIFICATION OF COPPER ALLOYS FOR PRODUCTION OF ELECTRIC COMPONENTS
Industry : Metal manufacturingMaterial/Part type : Non-magnetic materialsMeasuring parameter : PermeabilityIndustry standard : IEC 60404-15, ASTM A342MFOERSTER device : MAGNETOSCOP with Permeability Special alloys of copper are valuable for their good electrical conductivity and optimal results for processing. Some special alloys possess extreme non-magnetic properties, that are additionally useful for magnetic sensitive applications. To adhere[...]
Read More03
Mar
Share
No Comments on Bond Testing between FRP and Rubber in Power Grid Insulators EECI Blogs
Bond Testing between FRP and Rubber in Power Grid Insulators
In power grid insulators, fibre-reinforced plastic/polymers (FRP) and rubberised materials are fused together. If the interface bonding is not uniform, the distribution of the electric field will be adversely affected, which accelerates the ageing of composite insulators and thus, affects the safe operation of transmission lines. Hence, it is important to inspect the bonding between the FRP[…]
Read More23
Feb
Share
No Comments on EECIFLUX MULTI-DIRECTIONAL MAGNETIC PARTICLE INSPECTION SOLUTION EECI Blogs
EECIFLUX MULTI-DIRECTIONAL MAGNETIC PARTICLE INSPECTION SOLUTION
The EECIFLUX multi-directional bench offers an efficient and reliable method to carry out magnetic particle inspection with minimal operator intervention. Highlights of the EECIFLUX multi-directional MPI bench solution: - True multi-directional magnetisation to identify cracks in all orientations in a single shot - AC and HWDC magnetisation - Advanced automation to control and customise test cycles[...]
Read More19
Feb
Share
No Comments on SONODUR 3 PORTABLE HARDNESS TESTING SOLUTION EECI Blogs
SONODUR 3 PORTABLE HARDNESS TESTING SOLUTION
The Sonodur 3 from Institut Dr. Foerster GmbH & Co. KG, provides an unique solution for hardness testing using both UCI (Ultrasonic Contact Impedance) & Leeb methods. The portable & rugged Sonodur 3 provides a reliable hardness testing solution for industries such as automotive, aerospace, heavy engineering, energy & power sector, tools, molds, steel, casting, material treatment, medical,[…]
Read More02
Feb
Share
No Comments on CAST SWASH PLATE INSPECTION OF AUTOMOBILE AIR-CONDITIONER COMPRESSOR EECI Blogs
CAST SWASH PLATE INSPECTION OF AUTOMOBILE AIR-CONDITIONER COMPRESSOR
Every automobile is equipped with an air conditioner, and there is a compressor between the heat exchanger of the indoor unit and the heat exchanger of the outdoor unit. The power of the compressor is transmitted from the power shaft of the reciprocating engine by a belt. However, in the special environment of an automobile,[…]
Read More28
Jan
Share
No Comments on NODULARITY MEASUREMENT BY ULTRASONIC FLAW DETECTOR ADVANSCAN AS-414 EECI Blogs
NODULARITY MEASUREMENT BY ULTRASONIC FLAW DETECTOR ADVANSCAN AS-414
Non-Destructive Nodularity Testing can be done with advanced ultrasonic instrument which is capable of measuring sound velocity. For dedicated nodularity measurement, “EECI” make Advanscan AS-414 provides direct readout of Nodularity percentage in cast iron and other materials based on an entered thickness. With the instrument calibrated for an appropriate frequency transducer, obtain a backwall echo[…]
Read More21
Jan
Share
No Comments on ROTARY ULTRASONIC TUBE/BAR TESTING SYSTEM EECI Blogs
ROTARY ULTRASONIC TUBE/BAR TESTING SYSTEM
EECI & Slickers Technology, Germany are proud to present an advanced ultrasonic rotary solution for the inspection of tubes & bars. The material is tested for: a. Longitudinal defects on the OD (& ID for tubes) b. Transverse defects on the OD (& ID for tubes) c. Oblique defects on the OD (& ID for tubes) d.[…]
Read More05
Jan
Share
No Comments on MAGNETIZING / DEMAGNETIZING COIL EECI Blogs
MAGNETIZING / DEMAGNETIZING COIL
EECI’s Portable AC magnetizing coils are designed for Magnetic Particle Inspection of ferrous metal parts. AC Coils only induce a surface field and are typically not strong enough to set-up a field, AC will only detect ‘surface’ defects. The coils allow for the use of either dry powder or wet fluorescent inspection media and may be[…]
Read More23
Dec
Share
Comments Off on MICROSTRUCTURE & CRACK TESTING OF ROTOR SHAFTS USING EDDY CURRENT EECI Blogs
MICROSTRUCTURE & CRACK TESTING OF ROTOR SHAFTS USING EDDY CURRENT
As a central component of electric motors, rotor shafts ensure the torque transfer from electrical energy to kinetic energy. Without the rotor shaft, an electric vehicle would not move. Withstanding very high loads requires high strength and sophisticated components. Non-destructive eddy current testing is suitable for detecting material and microstructural defects before they make it[…]
Read More