ELECTRONIC & ENGINEERING CO. (I) P. LTD.
20
Jul
Share
No Comments on GSM-5 – Compact Gamma Dose Rate & Dose Meter EECI Blogs
GSM-5 – Compact Gamma Dose Rate & Dose Meter
The GSM-5 is a Digital Compact Dose Rate and Dose Meter designed for a wide range of applications involving a possibility for abnormal radiation levels. Compact, lightweight, waterproof, its performance and its friendly user interface make the GSM-5 perfectly suited to radiation survey in field conditions, in nuclear industry and for protection against radiological hazards[…]
Read More06
Jul
Share
No Comments on MAGNETIC PARTICLE INSPECTION FOR CASTING EECI Blogs
MAGNETIC PARTICLE INSPECTION FOR CASTING
Magnetic Particle Inspection (MPI) is an effective process for discovering flaws in investment castings. This method is best for detecting cracks and flaws on the surface and just below. It can be used on all alloys that can be strongly magnetized including irons and ferritic steels. Austenitic steels are typically not good candidates. After a[…]
Read More29
Jun
Share
No Comments on Calibration Services For Radiation Detection & Monitoring Devices EECI Blogs
Calibration Services For Radiation Detection & Monitoring Devices
EECI‘s calibration lab for Radiation Detection and Measuring Equipments which is approved by Atomic Energy Regulatory Board (Department of Atomic Energy, India) vide approval No.17-CALOL-213161 dated 07.09.2017 & accredited by National Accreditation Board For Testing and Calibration Laboratories (#NABL) vide Certification No. CC-3032 dated 14.08.2019. We offer services to calibrate & certify Radiation Detection & Measuring Equipments. Our calibration lab has[…]
Read More15
Jun
Share
No Comments on HARDNESS TESTING WITH SONODUR 3
CALL FOR FREE APPLICATION TRIALS & DEMONSTRATIONS EECI Blogs
HARDNESS TESTING WITH SONODUR 3<br>CALL FOR FREE APPLICATION TRIALS & DEMONSTRATIONS
The Sonodur 3 from Institut Dr. Foerster GmbH & Co. KG (Germany), provides a unique solution for hardness testing using both UCI (Ultrasonic Contact Impedance) & Leeb methods. The portable & rugged Sonodur 3 provides a reliable hardness testing solution for industries such as automotive, aerospace, heavy engineering, energy & power sector, tools, molds, steel, casting, material treatment, medical, naval[…]
Read More08
Jun
Share
No Comments on Hardness Testing of CV-Joints and Tulips EECI Blogs
Hardness Testing of CV-Joints and Tulips
Hardness testing of the shaft of CV-joints is necessary, as they belong to the safety-relevant components. Lack of quality of the shaft‘s material can lead to breakage and thus failure of the drive train. The fixed outer races and tulips are also checked for quality purposes after hardening. Testing can be done using the non-destructive[…]
Read More01
Jun
Share
No Comments on SENTINEL 880 – Delta Gamma-Ray Projectors EECI Blogs
SENTINEL 880 – Delta Gamma-Ray Projectors
QSA Global, USA have been offering the SENTINEL 880 Delta Gamma-Ray Source Projectors for the past two decades. These projectors have proven durability and reliability to clients all across the world. They have an unparalleled safety record in varying environmental conditions such as snow, high humidity & hot deserts. They are extremely simple to operate, which ensures minimum[…]
Read More25
May
Share
No Comments on Automated 100% Crack & Heat Treatment Testing of Gear Shafts EECI Blogs
Automated 100% Crack & Heat Treatment Testing of Gear Shafts
The gear shaft is a central component of the transmission. The constant load changes stress the component to a high degree, which is why perfect material is necessary. Foerster assists in quality assurance with non-destructive testing systems, that use the eddy current method to check the gear shafts for material defects such as cracks, as well[…]
Read More05
May
Share
No Comments on SAMPLE TESTS USING SOFT ULTRASONIC TRANSDUCERS BY JP PROBE EECI Blogs
SAMPLE TESTS USING SOFT ULTRASONIC TRANSDUCERS BY JP PROBE
Japan probe is celebrating it’s 43rd year as a manufacturer of ultrasonic transducers and inspection systems in Japan, and is pleased to announce sample inspection in India through it’s distributor Electronic & Engineering Co (I) Pvt Ltd, (EECI). EECI’s branches cover 10 major cities in India, with which, Japan Probe will be able to support and uphold[…]
Read More06
Apr
Share
No Comments on TESTING OF ALUMINIUM CASTINGS WITH ADVANCED ULTRASONIC FLAW DETECTOR – AS414 EECI Blogs
TESTING OF ALUMINIUM CASTINGS WITH ADVANCED ULTRASONIC FLAW DETECTOR – AS414
Non-destructive testing using ultrasonic measurement is used to ensure the quality of Aluminium-casting products. The quality of a casting depends on the presence of discontinuities such as porosity and on the final metallurgical structure. Discontinuities occurring in the sub-surface of the cast structure mostly have irregular surfaces which scatter the ultrasound waves and make ultrasonic testing[…]
Read More09
Mar
Share
No Comments on QUALIFICATION OF COPPER ALLOYS FOR PRODUCTION OF ELECTRIC COMPONENTS EECI Blogs
QUALIFICATION OF COPPER ALLOYS FOR PRODUCTION OF ELECTRIC COMPONENTS
Industry : Metal manufacturingMaterial/Part type : Non-magnetic materialsMeasuring parameter : PermeabilityIndustry standard : IEC 60404-15, ASTM A342MFOERSTER device : MAGNETOSCOP with Permeability Special alloys of copper are valuable for their good electrical conductivity and optimal results for processing. Some special alloys possess extreme non-magnetic properties, that are additionally useful for magnetic sensitive applications. To adhere[...]
Read More